Wood Designer forum
Bottom in drawer|Forum|WOOD DESIGNER
Moderator
January 20, 2017
Offline
Ho sorry I got it!
The actual groove length in this fitting only made 550mm, and can be up to 650mm
From menu Libraries > Fittings > Fittings
But caution in cabinet you send, the drawer sub-methods used is BLUM/Movento, so the parts of drawers is not good
Cheers, Alex
Full
January 20, 2022
Offline
Thanks for your reply.
think we are talking about different things, maybe I didnt explain it all that good 😉
on the drawer bottoms we need the grooving to go all the way back underneath the whole drawer bottom along both sides to fit the Legrabox drawer sides.
I have changed the boxful but the grove are still not along the whole length of the bottom. Any ideas?
Kind regards, ola
Moderator
January 20, 2017
Offline
Hi,
If I well understand you talk about recess create per your Nil back ,
In fact, a panel defined as Nill is not actually suppressed, so it should be considered as glass without thickness,
You can’t go through it, you don’t see it but all the parameters remain active, like a groove, or here the Top, the bottom and the sides that go beyond it.
And so what reduces the drawer zone here
Hope that’s helpful,
Alex
1 Guest(s)
