Wood Designer forum
nesting and side doweling on maestro|Forum|WOOD DESIGNER
Moderator
March 25, 2024
Offline
Emanuel,
Perfect, have a look in Maestro at your 8mm tool set-up and parameters. It seems to be ok from PolyBoard.
Regards, Isaac
Full
July 5, 2024
Offline
THE PROBLEM LOOKS ON THE 8MM
Full
July 5, 2024
Offline
YES
Moderator
March 25, 2024
Offline
Emanuel,
Thanks, that is the file.
Do you have the following drill bits on your CNC machine:
– 3mm drill
– 5mm drill
– 8mm drill
– 20mm drill
If you would prefer, you can send me a photo of your drill bits in the Maestro Tool Manager.
Regards, Isaac
Full
July 5, 2024
Offline
THIS ONE
Full
July 5, 2024
Offline
HOPE THIS IS GOOD
Moderator
March 25, 2024
Offline
Hello Emanuel,
Yes, you sent me the Maestro files. I need the PolyBoard project please, so I can open it on PolyBoard.
Regards, Isaac
Full
July 5, 2024
Offline
I SEND THEM TO SUPPORT WITH WE TRANSFER
Moderator
March 25, 2024
Offline
Emanuel,
I need the PolyBoard file please, of the cabinets.
Thank you, Isaac
Full
July 5, 2024
Offline
Dear Isacc
I AM USING THE DOWEL RANGE PROCECER,AND ONE UNIT CAME GOOD .oNLY THE SIDES OF THE OTHER UNIT ARE GIVING ME PROBLEMS THAT IS STRANGE BECAUSE THE HOLES ON THE SIDES MUST BE SOMETHING EASY TO DO AND THERE IS A LOT OF OTHER HOLES THAT ARE DONE .THE DOWEL HOLES ARE GIVING ME PROBLEMS.
THANK YOU
E SACCO
1 Guest(s)
