Wood Designer forum
Post-processor options is a jungle|Forum|WOOD DESIGNER
Moderator
March 25, 2024
Offline
Hi,
For a PP set up I recommend the 2hr post processor pack. This would be split into two 1 hour sessions, the first for a basic set-up and the second after you have run some tests so that we can resolve any problems.
See the pack details through the following link:
[Subscribe to Premium Support to view this media]
Best regards,
Isaac
Full
January 20, 2022
Offline
Hi again,
We would like to schedule a training session to get all the details in place so that we can use the PP with the CNC like we would like to.
What is the price and how long is a session?
We have a CNC from Holzer, Dynestic 7515 that is from 2013 with Hops software.
Looking forward to hear from you soon.
Best regards,
Ola and Caroline
Moderator
March 25, 2024
Offline
Hi Ola and Caroline,
As premium support subscribers, you are eligible to a 15 minute screen share session. This is a limited time for a call, but we can utilise this to go through the post-processor options if you would like.
Additionally, see the following link. This breaks down the DXF post processor and explains each section:
[Subscribe to Premium Support to view this media]
There are always training packs that are available as well, one dedicated to post-processor set up, if you want a complete set up we can look at this option as well.
See what’s above and let me know how you would like to proceed.
Best regards,
Isaac
Full
January 20, 2022
Offline
Hi,
Would it be possible to scheduled a day and time with you professionals some time soon to learn more about all the options in the post-processor? We would like to get all the details in the right place.
Thanks,
Ola and Caroline
1 Guest(s)
