Log In
Home
November 8, 2013
Offline
Hi Jack, sorry when I changed over to imperial I didn't have the correct fractional setting (it was down to 1/2" instead of 1/16"). It should be ok now, attached. Thanks
The following users say thank you to Stefan for this useful post:
Jack Travis
October 6, 2016
Offline
Stefan said
Hi Jack, here are you files, I've done them in imperial rather than metric, hope that's right. If not, just let me know. Please note this is a file processing service, we haven't checked over your design. Hope the build goes well. Cheers, Stefan
Stefan,
curious, why did the process you ran come out with all thickness of 1" versus 3/4" and all the grooves came out 1/2" depths and 1"
widths? all my wood thicknesses on the file are 3/4" and the depths vary from 1/4" to 3/8".
jack
November 8, 2013
Offline
Hi Jack, here are you files, I've done them in imperial rather than metric, hope that's right. If not, just let me know. Please note this is a file processing service, we haven't checked over your design. Hope the build goes well. Cheers, Stefan
The following users say thank you to Stefan for this useful post:
Jack TravisOctober 6, 2016
Offline
FILE ATTACHED:
October 6, 2016
Offline
Ness,
looks like I will need you to print me a cut list with drawings and cut dimensions. I can't get enough detail with my lite version. what is my price as a premium member?
file attached.
jack
October 6, 2016
Offline
Stefan,
THANKS! GREAT!
November 8, 2013
Offline
Hi Jack, Ness is away this week. In the meantime can you let us know if this solution works for you. Explode the cabinet to easily delete all plinth elements, select the plinth volume/empty space below the cabinet, and add a new plinth just once with the shortcut button, then apply a plinth front back and sides:
If that's not what you're after, let us know and we'll get back to you as soon as possible. Best, Stefan
The following users say thank you to Stefan for this useful post:
Jack TravisOctober 6, 2016
Offline
Ness:
Please review the attached file to address my questions:
1. how do I add the sides to my plinths
thanks for your help.
jack
October 6, 2016
Offline
Ness,
also, program is only letting one leg of the plinth (frontage)?
October 6, 2016
Offline
Ness,
cabinet design attached.
regards,
jack
October 4, 2012
Offline
Hi Jack,
Can you post a drawing or photo and eventually the Polyboard file of your project.
best regards,
Ness
The following users say thank you to Ness for this useful post:
Jack TravisOctober 6, 2016
Offline
Ness:
hope you have been well.
any suggestions on designing a corner standing cabinet.
first attempt is not coming out equilateral. trouble adding 4" front sides without getting errors. "the assemblies of one or more panels could not be calculated."
regards jack
1 Guest(s)
Usage Policy