Log In
Home
January 20, 2017
Offline
Hi,
In the video we show you a method using 2 Nil shelves, instead you can use a classic shelf on top then change the double-back to overpassing.
Or use nil to delimit, that lets you add drawers or doors afterwards
All the best, Alex
March 18, 2021
Offline
Hi Ness
Thank you for you video very helpful
What about if you want to keep an actual shelf being the rail, example to be used on a base oven housing cabinet with a drawer underneath?
Please see file attached
Thank you in advance
October 4, 2012
Offline
Hi Helder,
Just to explicite Alex's video, here's another quick video that I've made for you:
Best
Ness
March 18, 2021
Offline
Hi Alex
Thank very much for your help
Kind regards
Helder
The following users say thank you to Helder Paulo for this useful post:
AlexJanuary 20, 2017
Offline
Hi,
OK, for middle rail use 2 nil shelves to separate
and for oversize control Sub-methods Groove and oversizing you're using
All the best, Alexandre
March 18, 2021
Offline
Also I'm having a problem with the cut list
When i highlight the part examples a left side is showing 760mm x 570mm which is the righ size for our base cabinets but when i try to print, on the cutting list is showing as 765mm x 570mm which
Thank you in advance
March 18, 2021
Offline
Hi Alex
Here is the file
Many thanks
January 20, 2017
Offline
Hi,
Can you upload your cabinet?
That's clearest to let me see what you have done
Thanks, Alexandre
March 18, 2021
Offline
Hi, I'm trying to build a kitchen base cabinet with 2 pan drawers, face frame stile cabinet with middle rail between drawers, for some reason pan drawer at the bottom once you add it it pushes back the middle rail, i have tried to add a nill shelf just bellow the middle rail to separate the zones but for some reason it still doing it
Any suggestions?
Thank you in adavance
Kind regards
Helder
1 Guest(s)
Usage Policy