Wood Designer forum
is it possible??|Forum|WOOD DESIGNER
Home
November 8, 2013
Offline
Please only post in English on the forum. But yes, the DXF output is made up of layers, you can link each layer to a specific tool.
مرحبا . ليس لدي برنامج polyboard لتصوير هذا من موقع الويب الخاص بك
قصدت أنه يمكن أن يعمل بتنسيق DXF إذا قمت بتغيير الطبقات
شكرا ستيفان
November 8, 2013
Offline
Hi, I’m sorry but I’m not sure exactly what you’re asking for here. There is a DXF post processor as well as the Homag one in your photo. You can modify the parameters in that post processor to suit your machine.
As part of a Polyboard Pro PP order, we can include support post processor set up if required.
I suggest you contact us with your availability and company details for an online demonstration so you can also talk to one of our technical team about integration with the CNC. Thanks
hi
I understood from your words and explanation that it fits with a machine
But we need some settings in the layers and it is permanent settings
Attach photos to you for confirmation
Thanks for your cooperation Stefan
November 8, 2013
Offline
Hi, Polyboard has a range of post processors that outputs in a file format for the CAM package that comes with your CNC. It is the CAM package that would generate the Gcode to run your machine.
Polyboard has a DXF post processor, so it shouldn’t be a problem to integrate our software with whatever CAM software you choose as virtually all accept DXF files.
I would ask for advice from your Sirius supplier on what cam software is appropriate for their machine.
Please see our Polyboard CNC integration page for more details. Thanks
I would like to buy a machine cnc driling
model sirius 950m
Can you work directly without the intervention of any third party when exporting?
They told me that they accept the following formulas (cad cam)
dxf dwg
Or should I refer to other programs?
for example (alphacam)
1 Guest(s)
