Libraries, Hardware, Rules.

Good evening, excuse my English.
Here from Lisbon, Portugal, I have been taking up your publications for a long time, congratulations to you for your dedication, I am a carpenter and I have a carpentry company and enthusiastic in the use of Software.

I bought Polyboard 6.05a, there are few but for a long time you can practice using the demos.
Now that I have full access to PolyBoard, I have some doubts about which until now it was not possible to obtain clarification. I used other software the OptiCut for about 10 years.

1-Hardware: 8 mm wooden pegs and for 5 mm spindles. How to create the drilling distribution using system 32 by applying the distribution on the main panel, “25-56-88-248-280-408-440-472”, (see attached files). The method I set up does not make the total count of the wooden pegs and the screws used for the construction of the furniture.
2- Rule: used in the attached file was the best result I got.

What method can be implemented to account for all parts consumed in the designed furniture?

Greetings,
Carlos do Carmo