Wood Designer forum
adding shelves to unit with vertical div|Forum|WOOD DESIGNER
Home
May 12, 2020
Offline
Hi Alex
Thank you very much for your help its exactly what i want
Caroline
January 20, 2017
Offline
Here it is!
All the best, Alexandre
May 12, 2020
Offline
Hi Alex
Im sorry but can you put this on a video only new to inner tooling not sure how to
Thanks for your help
Caroline
January 20, 2017
Offline
Hi,
First have inner tooling of 71mm x 20mm
and second 71mm x 392mm
All the best,
Alex
May 12, 2020
Offline
Hi Alex
Yes thats exactly but with the panel on the right hand side flush (double back as previous unit) , does that mean i have to set back the shelves to allow for this??
Hope this makes sense
Caroline
January 20, 2017
Offline
maybe like this?
May 12, 2020
Offline
Hi Alex
Yes I can do a drawing no problem, but if you see the unit attached again just want to add the shelves top and bottom as the unit is
Thanks Caroline
January 20, 2017
Offline
Hi,
Can you make a quick drawing of what you need, to see how we can achieve it?
by hand or by screen capture edit with MS paint, save as png
All the best, Alexandre
May 12, 2020
Offline
Hi Alex
Yes i see how you did that but i want to keep the double back panel on the right hand side of the vertical (but not left of the vertical) flush to the front and also the shelves to be flush to front which probably means a cut into the shelves to allow for the vertical
Does that make sense??
Caroline
January 20, 2017
Offline
Hi,
it makes sense, if I understand correctly 
You add recess on Vertical division from back but orignal panel already exist,
to overcome this constraint,
add a nil double-back at 70 mm from the front, add a vertical division in front of the nil double-back to have 70mm Vertical division, and add the shelves behind it
All the best,
Alex
1 Guest(s)
