Wood Designer forum
Adjusting the drilling distances |Forum|WOOD DESIGNER
Alex said
Hi,
Without your cabinet I can’t see all you’re setting,
But I think’s it due to edge thickness,
2 way, first is to set cultist option to Overall Dim.
Other solution can be to set edge thickness to 0mm,
Hope that’s helpful!
Alexandre
Hi,
The edges is not applied..
Is there other options as for few hours now try to fix that and nothing works..
Alex said
Hi,
You can use rules with fixed distance,
A= first drilling
B= distance between
C= no drilling distance
Or Multi
A= first drilling
B= Last max multiple before C (only change distribution option if not clear)
C= no drilling distance
All the best, Alexandre
Hi, Alexandre,
Thank you, in general it works, but now I think I have some other issue:
– I have placed the fitting link rule as you described above and it perfectly works for link Side – Top
– But when I place the same rule for Side – Bottom, 2 mm are somewhere gone
The rule is absolutely the same:
Why I have this?
Thank you in advance.
Hello,
I have an issue on adjusting the drilling distances in fitting link rule.
I have drawn an wardrobe and printed out the drawing, but by default I have the distance between “B” drillings 122 mm between “A” 313.2 mm. (please find attached).
However, for these drillings I want to use semi – automatic boring machine where the actual distance between the drills are 32 mm, so it means that in between any of the holes in the drawing the distance have to be a number which divides from 32 mm into full number.
I attached the print screen of an issue and out in red the numbers I would like to have.
How to set this?
Thank you.
1 Guest(s)