Log In
Home
November 8, 2013
Offline
Hi, can you confirm whether you've solved the problem or not. Thanks
March 22, 2018
Offline
Hi Alexandre,
Yes, I have changed “Working Area Left A/I”.
January 20, 2017
Offline
Hi Atsushi,
Have you try change "Working Area Left A/I"?
March 22, 2018
Offline
I forgot to upload pictures.
March 22, 2018
Offline
I'm sorry again.
I set up and I can't inport into Maestro. Is there any miss in Post Procssor propertiese?
Please help me.
March 22, 2018
Offline
Hello Alexande and Stefan,
No problem, thanks. I was able to do it. Super! I'm happy this is convenience.
I deeply appreciate your kindness.
Atsushi
November 8, 2013
Offline
Hi Atsushi, as Alex says, you can create lots of different variations of your post processor so you aren't modifying a single configuration each time. See below to create a duplicate of your post processor settings and modify as you wish. All the best...
The following users say thank you to Stefan for this useful post:
Atsushi ItoJanuary 20, 2017
Offline
Hello,
Sorry for my english,
You don't need to select your tools for each export if correctly setup in your Post Processors
You can duplicate your PP to have more possibilities of exporting without having to modify it with each export
All the best, Alex
The following users say thank you to Alex for this useful post:
Atsushi ItoMarch 22, 2018
Offline
Hi Alexandre,
Thank you for your advice! I must select the right tool whenever export file...
I see, I competed set-up.
Thank you.
January 20, 2017
Offline
Hello,
In Polyboard, you must select the right tool in the Post Processor,
Files->Post Processor Option->XXL
Don't forget to setup the right location for Winxiso/XConverter, as Polyboard can directly give you pgmx files after export so you don't have to import xxl in Maestro, (PS: maestro must be installed on the same computer as PB, or just copy Winxiso/XConverter in SCMgroup folder to same computer).
The following users say thank you to Alex for this useful post:
Atsushi ItoMarch 22, 2018
Offline
I solved the problem! Thank you!
But when import into Xilog Mestro, a larger tool is chose to groove than a line which I hope to make.
Can I get polyboard to choose a suited tool itself?
1 Guest(s)
Usage Policy