Wood Designer forum
Can't Change Materials on Door |Forum|WOOD DESIGNER
Home
January 24, 2023
Offline
OMG…haha. Thank you Alex, that has resolved my issue!
Cheers,
Tom
January 20, 2017
Offline
Hi,
You can keep it, but you have to move it first.
Cheers, Alex
January 24, 2023
Offline
Hi Alex,
Unfortunately I cannot put a hanging rail inside the unit without doing using this nil panel 0 from the front. It closes the zone. I also have to remove the ‘notch’ as it is a free shape object. This advice was given to me from Michel when I was unable to apply the hanging rail as standard to this free shape cabinet. Any other advice to ensure both work would be great.
Cheers,
Tom
January 20, 2017
Offline
Hi,
The Nil double back at 0 mm from front lock the depth, please set the position at 10mm for exemple before change thickness
Cheers, Alex
January 24, 2023
Offline
hello,
I tried to change the door material and blanking panel to 22mm painted material, but it says something about ‘Panel structure generation failed’.
Not sure why, any help would be great thanks.
Cheers,
Tom
1 Guest(s)
