Wood Designer forum

Sign up to Premium Support

to speak to our technical team

cutlist please|Forum|WOOD DESIGNER

<img data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-avatars/defaults/admindefault.png?lossy=0&strip=1&webp=1' class='spAvatar lazyload' style='max-width: 50px' alt='Avatar' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-avatars/defaults/admindefault.png?lossy=0&strip=1&webp=1' class='spAvatar' style='max-width: 50px' alt='Avatar' />

Home Forum PolyBoard cutlist please

<img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/lightpack/sp_Feed.png?lossy=0&strip=1&webp=1' alt='sp_Feed' />

cutlist please

<img src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-avatars/defaults/moddefaultwd2.png?lossy=0&strip=1&webp=1' class='spAvatar' style='max-width: 50px' alt='Avatar' />

Alex

Forum Posts: 1758

Subscriber Since:
January 20, 2017

sp_UserOnlineSmall

<img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/lightpack/sp_UserOnlineSmall.png?lossy=0&strip=1&webp=1' alt='sp_UserOnlineSmall' />

Online

4

September 13, 2021 - 8:32 am

<img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' />

<img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' />

Hi,

Cut list does not include project control & editing!

If I look in your project, on “Pat” your two drawers front,

one have 154 mm Width in oversizing but,

both have the same original Width at 897 mm

All the best, Alexandre

sp_PlupAttachments

<img class='' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-plugins/plupload/resources/images/sp_PlupAttachments.png?lossy=0&strip=1&webp=1' alt='sp_PlupAttachments' />

Attachments

drwfrt.png (259 KB)

1-2-1 Support & Training | Help Centre | How to use the Forum

<img data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-avatars/defaults/admindefault.png?lossy=0&strip=1&webp=1' class='spAvatar lazyload' style='max-width: 50px' alt='Avatar' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-avatars/defaults/admindefault.png?lossy=0&strip=1&webp=1' class='spAvatar' style='max-width: 50px' alt='Avatar' />

Guest

3

September 13, 2021 - 6:47 am

<img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' />

<img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' />

Thank you very much for your response.

You have some issues with the program tho. Its just what I saw in first minute looking over the cutting list.

I have 2 drawers in pat. Same measurements! In cutting list you sent me, one front is 1051mm the other is 897 mm. I think they both should be 933mm.

Realy hope is the only missed calculated panel, because Im getting the plans to cut the pieces today.

Just to be sure, Im going to look over all of them in next couple hours.

Thanks again!

Best regards,

Alexandru Balogh

<img src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-avatars/defaults/moddefaultwd2.png?lossy=0&strip=1&webp=1' class='spAvatar' style='max-width: 50px' alt='Avatar' />

Alex

Forum Posts: 1758

Subscriber Since:
January 20, 2017

sp_UserOnlineSmall

<img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/lightpack/sp_UserOnlineSmall.png?lossy=0&strip=1&webp=1' alt='sp_UserOnlineSmall' />

Online

2

September 10, 2021 - 8:06 pm

<img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' />

<img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' />

Hi,

Please find your files attached

All the best, Alexandre

sp_PlupAttachments

<img class='' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-plugins/plupload/resources/images/sp_PlupAttachments.png?lossy=0&strip=1&webp=1' alt='sp_PlupAttachments' />

Attachments

Project-real-Cutlist.zip (1 MB)

1-2-1 Support & Training | Help Centre | How to use the Forum

<img data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-avatars/defaults/admindefault.png?lossy=0&strip=1&webp=1' class='spAvatar lazyload' style='max-width: 50px' alt='Avatar' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-avatars/defaults/admindefault.png?lossy=0&strip=1&webp=1' class='spAvatar' style='max-width: 50px' alt='Avatar' />

Guest

1

September 10, 2021 - 5:55 pm

<img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Permalink.png?lossy=0&strip=1&webp=1' alt='sp_Permalink' />

<img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon lazyload' data-src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' src='data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==' /><noscript><img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/sp_Print.png?lossy=0&strip=1&webp=1' alt='sp_Print' />

Please send me the cutlist for the plans added.

Thank you very much for your time and help

Best regards,

Alex

Close Statistics

<img class='spIcon' src='https://b2201857.smushcdn.com/2201857/wp-content/sp-resources/forum-themes/reboot/images/lightpack/sp_Feed.png?lossy=0&strip=1&webp=1' alt='sp_Feed' />

Forum Timezone: Europe/London

Most Users Ever Online: 256

Currently Online: Alex

Guest(s) 34

Currently Browsing this Page:
1 Guest(s)

Top Posters:

Ness: 1939

Tom Cleaver: 162

mark nichols: 160

brendan kavanagh: 136

Conor Devoy: 132

Duayne Naugle: 130

Stu Robertson: 104

Zaheer Abbas: 86

Robert Coxhead: 63

Patrick Maylor: 62

Newest Members:

Keith Shelley

Kate Polak

zorsim

Janio Soares

Kitchen Jockey

pg_panel7

hadialnajjar

Isaac

butnariu daniela

Yosi Siboni

Forum Stats:

Groups: 2

Forums: 7

Topics: 2103

Posts: 11510

Member Stats:

Guest Posters: 4

Members: 260

Moderators: 0

Admins: 11

Administrators: Stefan, Michel, Carole, Alex, admin, Laly, ipatrick, Crystal, Fatima, Darren, Isaac

© Simple:Press —