Hi,

When the spacing of your uprights is equal, this creates 3 equal zones, and 3 equal drawer boxes,

But because of the different overlaps on the sides and the mitre uprights, the front cannot have the same dimension,

Here if you look from Top view, the size of the front of the left and right drawers is equal to the zone (542.67) + left/right side overlaps 16.5 mm + 1 shared upright (8.25 mm) = 567.42 mm.

centre drawers = equal to zone (542.67) + 2 shared uprights (8.25mm+8.25) = 559.17mm

You can select by holding down the Ctrl+shift+left-click keys, then right-click and select Equalise doors and drawers size.

The zones are modified by moving the uprights, to have equal fronts, but also by changing the drawer boxes.

Kind regards, Alex

No problem,

If you save the cabinet itself (File>Save as), and send me the PolyBoard file. I will look at the cabinet for you.

Regards,

Isaac

Hi William,

Would you send through your file? I will have a look at it for you.

Regards,

Isaac