Wood Designer forum
Drawers needs sides and Corner cabinet advice needed|Forum|WOOD DESIGNER
February 8, 2024
Offline
Hi Alex,
Thank you, that helped. I will make my changes.
Moderator
January 20, 2017
Offline
Hi,
At the start of the design process, it’s very important for me to choose your hardwares
On wall cabinet I see you used standard hing instead of Blum like base cabinets?
Another point on the angular part, the addition of filler is also a part not to be neglected because there will very probably be a handle which could then hits at the opening.
For exemple frontage of 445mm on Left and 870mm double doors cabinet to have 30x30mm filler
Hope that’s helpful, Alex
February 8, 2024
Offline
Good day,
I am very new on polyboard and are still watching videos and learning. So I need some help please.
Could you please help me to add sides in my drawers and also look at the corner unit to see if the doors will work fine?
I have also removed alot of the fitting links as we always had someone else help us with Cutting lists and then we would just use screws to asseble the boards/cabinets. It works fine for us, but we do need the holes for the door hinges though.
If you pick up anything faults please let me know so that I can better my skills.
O, we also want to use sliding rails for the drawers, but I have not selected anything there yet.
Thank you in advance for all the help and patients.
Tanya
1 Guest(s)
