Wood Designer forum
Fittings link to Summary List|Forum|WOOD DESIGNER
Home
January 20, 2017
Offline
Hi,
I’ve also just pulled out the few hairs I have left.
But I have found it!
You using panel Counter-frontage, but here your counter frontage doesn’t existe (Nil panel)
This is an internal option to submit the fittings link provided on the drawer counter-frontage to the drawers frontage panel when the panel is set to Nil.
Please see video for update them properly (else they appairer twice and made bug)
Move you fittings on counter frontage to frontage
Cheers, Alex
December 7, 2018
Offline
Hi Alex
I have saved the attachments as PDF as the jpg files were to large
hope these help
Cheers
dave
December 7, 2018
Offline
Thanks Alex that does work
However to add a drawer through Manufacturing Methods I seem to have to use the Fitting Rule: Counter-Frontage_Drawers with Bottom_Drawers (see attachment – Fitting Links Sub-Method) for the ‘fittings’ that we want to link through, a rule using Frontage_Drawers with Bottom_Drawers doesn’t work?
When Appling the drawer type to cabinet (see attachment – Apply Method) the Method brings in “two” rule links (see attachment – Fittings Link List) Counter Frontage and Drawer Frontage (e.g. Drawer_Top) each time. As per your example if I delete all rules out of Counter-Frontage the ‘cam’ fitting is now recorded in the Summary List as we wanted.
Not sure if I am doing something wrong here or a software glitch? If we have to change drawer types with similar Rules this will mean we will have to delete some unwanted rules out each time?
regards
Dave
January 20, 2017
Offline
Hi,
Can look this video, and try to look if it work better for you
After deleting all unused links with the bottom of the drawer, and the back side, and the duplicated line with the bottom of the drawer and the side of the drawer.
all seems to be back in order, they also appear well in the list
don’t forget to delete duplicate line from your fitting link Sub-metohd
All the best, Alex
January 20, 2017
Offline
Hi,
I’m going to look at your cabinet today but I’ve come across some inconsistencies in the sub-methods that seem to block the correct operation
some duplicate lines
let you now as soon as possible
Cheers, Alex
December 7, 2018
Offline
Hi Alex (sorry for the delay on this)
we are running Polyboard 7.08c
In our drawer units when a drawer is over 700mm wide we use a Hafele Caravan Connector to drawer bottom for fixing drawer front for over size drawers.
In our attached 3 Drw unit example – Link Counter-Frontage_Drawer & Bottom_Drawer the Fitting Link [1] the fitting is described as Drw Cam Connector – this fitting does not come up in our summary list ?
regards
Dave
January 20, 2017
Offline
Hi,
Can you send cabinet?
Which version have you got?
Which fitting are not available?
All the best, Alex
December 7, 2018
Offline
Hi Team
We use the Summary List for ordering and have some Fittings that don’t come through into Summary List.
Is there something that we need to do with the Fitting that enables it to be recognized in the Summary List?
Regards
Dave
1 Guest(s)
