Wood Designer forum
Hardware Packs|Forum|WOOD DESIGNER
Home
October 3, 2022
Offline
Thanks,
That makes loads of sense.
J
January 20, 2017
Offline
Hi,
In order to make this more readable, we now indicate the standard overlap value of the box as it is registered with the hardware supplier
“D” for blum, “B” for hettich, “K” for Grass and Salice , In the absence of this information, the recovery value of the min-max value will be indicated. ( rec / ol )
This value is the fixed overlaps value from inner side, (this value is always provided in use with 0mm Baseplate!)
X / I is the type of baseplate crossed or inline, and the value 0X is the thickness of the baseplate
All the best, Alex
October 3, 2022
Offline
Thanks, that is a great help.
It still doesn’t explain the X** value unless I am misreading the document, I am also unsure what the D11 value at the end means and how it relates to the geometry.
March 25, 2024
Offline
Good morning,
In your Quick Design Libraries you will find a folder called Guides.
This contains a document called PolyBoard Quick Design libraries manual.
This should contain the information you are after. I have also attached this document here.
Regards,
Isaac
October 3, 2022
Offline
Is there a description anywhere on the naming conventions in the hardware packs? There seems to be some standard but I havnt worked it out yet.
For example, in the Blum pack there are 2 very similar fittings “Blum/HINGE/75T159-X00/app/D11” and “Blum/HINGE/75T159-X03/app/D11”. Looking at the fittings it looks like the X** is the mount plate height?
Is there a document you can share that explains these conventions?
1 Guest(s)
