Wood Designer forum
Help needed setting up regular drillings|Forum|WOOD DESIGNER
Home
September 19, 2023
Offline
Thank you Alex, most appreciated all working
Kind Regards Andrew
January 20, 2017
Offline
Please update to the last 7.10U from download pages
Cheers, Alex
September 19, 2023
Offline
Hi Alex, Your English is very good, no problem understanding you,
When I try to load file I am getting a unexpected file format PolyBoard 7.10F I have had this problem before with something Michel sent me,
Thank you for the Video all make sense
Regards Andrew
January 20, 2017
Offline
Hi,
Please find attached draft With 2 Extra fitting and 3 Rules
I’m really sorry for my english
And out of video adding Metal structure
Hope that’s helpful, Alex
September 19, 2023
Offline
Hi Alex,
Please find attached drawings, I have removed my attempts with fittings, we are using 40 x 40 & 80 x 40mm Aluminium slot extrusion with 8mm slots & slot nuts as the internal frame.
Kind Regards
Andrew
January 20, 2017
Offline
Hi,
Can you send me your cabinet and hand drawing of our needs?
Cheers, Alex
September 19, 2023
Offline
Hi, I have been trying to set up regular drilling in the edge of under passing and overpassing edges to allow bolting to an internal corner without much success and need help please the holes are 8mm starting at a set point and finishing at a different point with 4 additional holes equally spread but on the under passing panel 20mm in from the edge and on the overpassing panel 38mm in from the edge, the panels are 2050H x 1182W, are you able to assist? Thank you Andrew
1 Guest(s)
