Wood Designer forum
How can I make a botom board to be embeded to the sides?|Forum|WOOD DESIGNER
Home
March 25, 2024
Offline
Hi Nikos
Great news that you found the problem.
You can download the latest version with the following link. Make sure that you are logged into your WoodDesigner account.
https://wooddesigner.org/softw…..downloads/
Regards,
Isaac
March 1, 2024
Offline
Hi,
I found the problem, my sides were Nill panel and it doesn’t work, after removing the nill panel it was ok.
I have an older version, I tried yesterday to update it but I didn’t find the new version to download.
March 25, 2024
Offline
Nikolaos,
- Have you tried deleting the drawer and adding it again?
- Is your manufacturing method calling on the drawer that you have made and not any other drawer?
- Additionally, have you updated to the latest version of PolyBoard, 7.12d?
Let me know how you go.
Regards,
Isaac
March 1, 2024
Offline
Hi,
thank both of you for your reply, I dont know what I do wrong but I created my own Rules but still the laterly slack is wrong. 
March 1, 2024
Offline
thank you for your help but the lateral slack looks do not have any influence in the model.
August 7, 2014
Offline
Hi Nikolaos
In the drawer submethod, you have access to the drawer box assembly. There, you need to set a recess and overlap rule parameter. In the below example, you see that the bottom grooves 8mm into the sides.
Regards
Michel
1 Guest(s)
