Wood Designer forum
Kitchen build in a free form wall geometry - Technical integration|Forum|WOOD DESIGNER
Moderator
January 20, 2017
Offline
There are few opportunities for oversizing.
for most commun used :
-With the PP version and when exporting to the CNC, this generates oversizes to calibrate the parts,
-When you have parts with chamfered edges that can be used to leave a few millimetres to finish the chamfered edges to another machine.
-Addition of an oversize which does not appear in 3D, but which makes it possible to add an oversize to the re-cut part during the installation of the pieces of furniture, for the filler, plinth and worktop
You can remove chamfered oversizing from the sub-methods “Goove and over.” used on the manufacturing methods.
All the best, Alexandre
October 4, 2017
Offline
Alex said
Hi,When I open your project, I see that this part is oversized.
Cheers, Alex
Thanks, what is the use of this feature? Even if you oversize it, the dimensions from measurement tool remain the same.
I cannot get what should be the real size of that piece.
Thanks.
Moderator
January 20, 2017
Offline
Hi,
When I open your project, I see that this part is oversized.
Cheers, Alex
October 4, 2017
Offline
In cabinet ‘Γωνιακό Ντουλάπι 1’ the cutting dimensions for ‘side 3’ is 768 X 538.5 but in the project.pb-proj the dimensions is 768X529.5. Do I miss something?
Thanks.
Moderator
January 20, 2017
Offline
Hi,
Very nice for first project with complexe shape
Please find your projet uploaded
Kind regards, Alex
October 4, 2017
Offline
Hi, here is my final project file. Units are mm and net dimensions please.
Thanks.
Moderator
January 20, 2017
Offline
Yes, export are generated from my own settings
October 4, 2017
Offline
So, it seems that you need to change it to net dimensions again, even if the file I saved and sent to you had already this set to ‘Net Dimensions’
Thanks.
