Alexandre,

Thank you so much for all your help, my next project should go much smoother now that I know what I’m doing. The Pdf still didn’t have the exploded view with numbered panels like the first one did, is there something I should specify in the future to get that? It’s helpful but not critical and I can get by without it. The most important thing was the measurements and they are with the level of precision I need. I’m surprised that the Units preference is only stored globally on the application and not also stored locally with the Protect file.

Thanks again

Perrin

Alexandre,

Thank you for putting together the cut list for me, one big problem i’m seeing is all the dimensions on the pdf are 1/4″ precision, my cabinet uses precision of 1/16″. 1/4″ precision is useless to me, I had the units set to Inches (Fractional) and Precision set to 1/16″. The first pdf also had exploded views of the cabinet sections with panel numbers, this one doesn’t.

Is there something I did wrong? Is there any way I can get a list with 1/16″ precision?

Perrin

Alexandre,

Sorry about that, hopefully I did it right this time

Perrin

Alex,

I attached the revised project, I changed the panels to wood with grain, I also removed the doors and drawers, those are being done separate. Hopefully I have everything correct this time.

Thank you for your help

Perrin

Thank you so much for your help, I am downloading the quick design library and will change the material on the project this weekend. I really appreciate that you will generate a new cut list for me once I have made the changes. 

Please forgive my ignorance here because I’ve never worked with software like this before, I wasn’t expecting DXF Cad? files and I don’t have anything that will open them. What do you suggest I use?  I going to be cutting the panels at a friends shop on his Schelling FH6 so I’m sure his machine will like the file format but I will need to view them and probably make some minor changes.

Thanks Again

Perrin