Wood Designer forum
Missing Rules - Blum Lift Systems|Forum|WOOD DESIGNER
November 27, 2020
Offline
All fixed! Thanks as always Alex
Moderator
January 20, 2017
Offline
Hi,
If you have PolyBoard 7.08M or higher, you can open the attached file to restore the fitting and the rule.
Alternatively, I have attached an XLM file in the ZIP file which you can restore to your libraries for use with the 0 Inner rule as in the screenshot.
Cheers, Alex
November 27, 2020
Offline
Hey Alex,
here is the data sheet for the HK Top that we are using the most. Please disregard the top right one as we prefer the one with the 5mm screws.
Thank you!
Best,
R
Moderator
January 20, 2017
Offline
Hi,
You can restor rule from cabinet you create previously,
Elese can you send me the cabinet and the data sheet or reference of the lifting system used?
Cheers, Alex
November 27, 2020
Offline
Hey guys.
I seem to have overwritten my rules for the Blum lift systems with a different rule (from restoring a file that was downloaded)
Is there a way to easily get these back?
Thanks in advance!
Best,
Rich
1 Guest(s)
