Wood Designer forum
Mortice error|Forum|WOOD DESIGNER
Moderator
January 20, 2017
Offline
Hi,
I send you mail with extra information
Cheers, Alex
Full
January 28, 2018
Offline
Hi Alex,
I don’t have groove compensation in my post processor
Any ideas?
Thanks, Conor
Moderator
January 20, 2017
Offline
Hi,
I have done a series of tests and I can’t find any problem,
Can you look if in PostPro option your are well in center mode
With a shift of the slack in the thickness of the sub method of course
Cheers, Alex
Full
January 28, 2018
Offline
Hi Alex, we had spotted the edging on the drawers and deleted it.
So I’m not sure that’s the answer.
Thanks, Conor
Moderator
January 20, 2017
Offline
Hi,
I can see the front and back of the drawer sides and that must surely be the problem
I will look into this in more detail as soon as possible
Cheers, Alex
Full
January 28, 2018
Offline
Hi all, we make our drawers with 16mm material using an 8mm mortice and tenon.
Something has changed and I cannot find where the error is.
In the image attached it looks correct, but when we look at it in cad the lines for the 6mm cutter are not correct.
We should have one line at 11mm and one at 13mm with the 6mm cutter working on the centre.
I’m attaching some images and job file.
Regards and thanks,
Conor
1 Guest(s)
