Wood Designer forum
No fittings|Forum|WOOD DESIGNER
Home
January 20, 2017
Offline
Hi,
Please find your files attached
Cheers, Alex
December 26, 2019
Offline
Oops! Last minute change. These files please.
-Stuart
December 26, 2019
Offline
If the files look ok to you now, can I have cut files please.
Thanks
-Stuart
December 26, 2019
Offline
I’ve used a different email address, and updated successfully.
-Stuart
December 26, 2019
Offline
Tried downloading again. No confirmation email received. Webpage says to contact Wood Designer if using the same email as before, in order to get a new download link.
-Stuart
January 20, 2017
Offline
Hi,
Can you try to update your software to the last 7.10K
Download installer from download page , Then run installpolyboard.exe and follow the instructions.
Never uninstall your software!
Cheers, Alex
December 26, 2019
Offline
Thanks.
Adding double backs seems to work differently for me than you. I add the External Zones (20mm and Outer) to Upper, Plinth, Right and Left. The red, right and left zones don’t have mitred corners, and the right-click menu on these zones doesn’t have any of the Add options.)
The top and bottom external zones do have mitred corners, but when I add a double-back (Distance from front 0mm), it appears as a two dimensional panel about 5mm back from the front.
-Stuart
January 20, 2017
Offline
Hi,
First to ask is if the CNC is able to make drilling into edges,
which allows us to determine the family of fixing links to be used,
-by edge drilling with Cam and dowels like Titus Quickfix, or basic dowels and screws
-on surface like Hettich VB36 or Lamello Cabineo, which are machined exclusively on the surface
For framed faces, you can use double-back please see video attached,
Hope that’s helpful, Alex
December 26, 2019
Offline
Thanks. Sketch attached showing architrave.
This is my first cabinet. After this I want to do cabinets with doors, hinges and drawers. I don’t know enough about CNC to know which kind of fixings will work for the CNC machine I can use. So I’d like to know what I should ask the technician about the machine to find out, please.
-Stuart
1 Guest(s)
