Wood Designer forum
Open curves |Forum|WOOD DESIGNER
Home
January 20, 2017
Offline
Hi,
I think that indeed to force the separation, it would be necessary to declare a false thickness, to generate 2 entities, and to re-modify afterwards the depth manually.
Cheers, Alex
November 15, 2014
Offline
We are trying to make a relatively simple cutout, but as soon as the contour for the inner tooling hits the contour for the side profiling the two joins together. the tool we are using for profiling is not able to do the inner tooling due to its size, which means the cutout wont be made.
January 20, 2017
Offline
As indicated it would be easier to go through an internal tooling process to apply a particular tool
The Edge tooling must cover the whole length of the edge, to be easily placed
Cheers, Alex
November 15, 2014
Offline
We try to make a cut out in the edge af a panel , under libraries we choose open curves and draw a contour, but how is that implemented.
January 20, 2017
Offline
Hi,
Can you show me an example of your open curve?
But specify tool are only available for Inner Tooling in this case,
The tool ID must be configured separately in the post-processor option.
Cheers, Alex
1 Guest(s)
