Wood Designer forum
plinths|Forum|WOOD DESIGNER
Home
March 25, 2024
Offline
Emmanuel,
I don’t see an attachment, you might need to try and upload it again.
Follow the link below, it will give you instructions on uploading attachments to the forum.
https://wooddesigner.org/forum…..ing-files/
For the doors, you can also try removing your top shelf and hanging rail, adding your door, and then adding these elements back into your cabinet after your door is added. This should be an easier way to add the door.
Regards,
Isaac
July 5, 2024
Offline
down under i make a small scetch of how i need the back .thanks
July 5, 2024
Offline
hi isaac.
thank you for your reply .
i am trying to put the doors as you told me .it works ,but after the first klick it goes over the drawers not the open parts were i want to put the doors.i tried different ways to put them but always the same thing happen .
July 5, 2024
Offline
I AM TRYING TO PUT DOORS HERE BUT CANT LET ME .WHY .I CANT BRING ALL SECTION HI LIGHTED
July 5, 2024
Offline
HI ISAAC ,THANK YOU FOR YOUR REPLAY .I AM WORKING ON A REAL PROJECT AND TRY TO GET DEEP AS I CAN IN IT.I THINK YOU CANT UNDERSTAND ME ON THE BACK ISSUE .I HAD THE GROVE DONE WELL OF 10 MM SHOLDER AND 8 MM DEEP WITH 10MM WIDE .I USE 18 MM B ACKS SO I NEED TO MAKE A BATTEN ON THE BACK OF 10MM WIDE BY 8 MM DEEP.
SECOND QUESTION IS I MAKE THE DRILLING HOLES ON THE SIDE BUT THEY ARE NOT SHOWING , AND HOW I CAN COPY THE SAME CABINET IN AN OTHER FILE .
THANKS AGAIN
March 25, 2024
Offline
Hi Emmanuel,
I am not sure what you are asking, but I have added more examples of what might help you.
Please refer to the other three videos I have posted below. Also, sessions 5 & 6 of our training will help answer these questions you have, so refer to your training folio.
Additionally, refer to the following video, this shows a mortise and tenon joint being made in a cabinet for if this is what you mean.
Regards,
Isaac
July 5, 2024
Offline
Hi Isacc
other thing that iam notice as i told you is thet the side drilling holes are not showing and the main problem of the hanging rail is that it is not showing when i put the hanging rail shelf .
July 5, 2024
Offline
Dear
the back is 18 mm with a rebate of 10mm into the side .so i had to remove 8mm deep by 10 mm wide from the back .how can i do it .
thank you
1 Guest(s)
