Wood Designer forum
several questions|Forum|WOOD DESIGNER
Home
Sorry, it was my software unfamiliar,
let me watching the video first,
bother
best regards,
luo yan
October 4, 2012
Offline
Hi Luo,
Your rule references the over passing panel ie. the side.
You have to set the reference to underpassing :
best regards,
Ness
October 4, 2012
Offline
Hi luo,
Can you post the Polyboard pb-cab file so that we can see what is happening?
All the best,
Ness
Hi Ness:
Hi Stefan:
Thank you very much, you really are highly efficient!
The new problem comes out:
the Fixed Shelve [1] Width=581mm，Rules=50.5+480+50.5，two Tourillon，but the result is Three，
Top panel is right,only Shelve(have back panel).
best regards,
luo yan
November 8, 2013
Offline
Hi Luo, thanks for pointing out the ‘Edging on Sandwich Panels’ video error on this page
https://wooddesigner.org/membe…..ch-panels/
The correct video is now available to watch. All the best, Stefan
October 4, 2012
Offline
Have a great Christmas too Luo.
Best wishes for a successful and prosperous new year too,
Hope to talk again in 2016,
best regards,
Ness
Your October 4, 2012
Offline
Hello Luo,
Thanks for your post.
You are right, I think we have made an error for the video subject we will correct it after Christmas.
Your other questions also require some explaining and I would like to answer more in depth after Christmas.
For the time being, briefly:
wine racks can be made using “free divisions” :
Polyboard will output DXf so to get Gcode you’ll need to use CAM software like Vcarve.
See this video:
https://vimeo.com/wooddesigner…..e104b34f88
The drillings are marked out with letter for the drilling type (dia/depth) and x,y position:
If you need more details I’ll post after Christmas.
Have a great Christmas,
Ness
1 Guest(s)
