Wood Designer forum
Shelf notch|Forum|WOOD DESIGNER
October 4, 2012
Offline
Hi Conor,
Try this:
Select the shelf and set the link to the right side as Mortise & Tenon.
Set the Depth to the thickness of the side.
Set the Front shoulder to “0”
Set the Back shoulder to the width of the side panel.
Hope this is helpful,
Ness
Moderator
January 20, 2017
Offline
Hi,
Only solution I think, is to set Right to Nil, or No in general options,
And use a vertical division with tenon, but this won’t let you use another fittings link
attached example
hope that’s helpful,
Cheers, Alexandre
Full
January 28, 2018
Offline
Hope this helps.
Moderator
January 20, 2017
Offline
Hi,
Sorry, but I’m not sure I understand,
Can you send me a picture of what you want,
Cheers, Alexandre
Full
January 28, 2018
Offline
Hi all, I have attached a basic cabinet.
I have reduced the right hand gable by 100mm and I want the shelf to notch around by the 100mm and the thickness of the gable.
I’ve tried over passing the shelf and using inner tooling but it seems to cut through the gable.
Help please.
Thanks, Conor
1 Guest(s)
