URGENT REQ: Installation of 750 Blu Movento Runners|Forum|WOOD DESIGNER

Home Forum PolyBoard URGENT REQ: Installation of 750 Blu…

URGENT REQ: Installation of 750 Blu Movento Runners

Isaac

Forum Posts: 793

Subscriber Since:
March 25, 2024

Online

January 22, 2025 - 10:02 am

Hi Tom,

See this sorted in the following video. Additionally, the fitting is attached as well. All you need to do is import the fitting into your hardware list. Please confirm the drawer system with the spec sheet that I used.

Regards,

Isaac

1-2-1 Support & Training | Help Centre | How to use the Forum

Tom Jackson

Forum Posts: 89

Subscriber Since:
January 24, 2023

Offline

January 22, 2025 - 9:35 am

Hi Isaac,

Yes If you are able to help me add the correct screw holes for the 750 runner that would be great – the link was to the Blum website that’s all. A quick google search would do the job.

They are the 750 Blum Movento Undermounted Drawer Runners.

Let me know how and when we could sort this out.

Cheers,

Tom

Isaac

Forum Posts: 793

Subscriber Since:
March 25, 2024

Online

January 22, 2025 - 8:57 am

Hi Sean,

See below a link to a video outlining the basic design features of PolyBoard.

https://wooddesigner.org/polyb…..are-tools/

The following link contains multiple videos integrating PolyBoard and VCarve Pro with a dxf post processor.

https://wooddesigner.org/help-…..rdesigner/

Let me know if you would like any more information.

Regards,

Isaac

1-2-1 Support & Training | Help Centre | How to use the Forum

sean mcmullan

Forum Posts: 63

Subscriber Since:
December 4, 2024

Offline

January 22, 2025 - 8:18 am

Hi i have stair designer and polyboard looks very similar and was looking for some good videos for polyboard i downloaded free version and was looking sone guidance. Could i see a video on drawing a very simple cabinet and exporting to the cnc please .

Thanks sean

Isaac

Forum Posts: 793

Subscriber Since:
March 25, 2024

Online

January 22, 2025 - 8:11 am

Hi Tom,

The link doesn’t seem to work.

If the 750 drawers use the same runner system as the shorter drawers, then everything should work correctly. The only thing you can add is some additional holes for the longer drawer.

Let me know if you need support doing this.

Best regards,

Isaac

1-2-1 Support & Training | Help Centre | How to use the Forum

Tom Jackson

Forum Posts: 89

Subscriber Since:
January 24, 2023

Offline

January 21, 2025 - 2:58 pm

Hi Isaac,

Brilliant that’s really handy, learnt a few tricks there! Does this method for the drawers affect the location of screw holes for a 750 blum movento system? I export these onto my big CNC machine, so it’s important the screw holes are all aligned and it can be fit for a 750 blum movento drawer system.

Reference LINK: (EDIT: link removed as no longer active)

It’s really important I get this right for the lads to fit and install the cabinets, not just for the 3D. Really appreciate the support. I have some training hours available, if you need to quickly and manually install it to my desktop could that be arranged if not via the forum?

Cheers,

Tom

Isaac

Forum Posts: 793

Subscriber Since:
March 25, 2024

Online

January 21, 2025 - 12:55 pm

Tom,

See the video below.

Regards,

Isaac

1-2-1 Support & Training | Help Centre | How to use the Forum

Tom Jackson

Forum Posts: 89

Subscriber Since:
January 24, 2023

Offline

January 21, 2025 - 10:20 am

Hello,

Here is my clients urgent request:

Room A is Hers, Room B is His.

For the alcove units I think what they want is one massively deep unit (790mm) with shelves about 300mm deep right at the back and then the front empty portion be free for half height hanging. I think I’d have to bring forward the hanging rail otherwise it will sit 50/50 in the full deep cabinet. The drawers below will be massive with Blum 750 runners, but its what’s requested, can you help me install Blum Movento 750mm drawer runners please?

Cheers,

Tom

Attachments

Rowe-1.zip (624 KB)

Forum Timezone: Europe/London

Most Users Ever Online: 365

Currently Online: Isaac

Guest(s) 24

Currently Browsing this Page:
1 Guest(s)

Wood Designer forum