Wood Designer forum
DXF details missing|Forum|WOOD DESIGNER
Home
January 20, 2017
Offline
Hi,
I think the files you’re looking to get for programming are the CNC DXF files available on SD/PB PRO Post-Pro.
The PRO PP version gives you even more options, especially for CNC programming.
in this version, all DXFs are already flattened for machining, you already have little version of DXF export from your PRO version but DXF options are limited
All the best, Alex
November 15, 2014
Offline
Dear Issac
That means the drawings cannot be used for programming, since they are not complete ?
Reg Torkild
March 25, 2024
Offline
Hi Torkild,
I have been looking into this and running some tests myself.
With StairDesigner, parts are drawn separately when you export into a 3D dxf file. The mortise and tenon are linked together in this drawing and not linked to the stringer.
At this time, you are not able to link the stringer and mortise in a 3D dxf file.
Regards,
Isaac
November 15, 2014
Offline
Hi Isaac
I can see what you meen. I´ll try again. Attached a staircase with curved stringboard. when exporting as DXF the steps do show tenons, but the stringboards havn´t got the mortis. Hope it maskes sense.
Regards Torkild
March 25, 2024
Offline
Hi Torkild,
It looks like the stair file you uploaded is different from the 3d DXF file you have uploaded.
Even though they are different stair cases, I can see that you have only applied the recess on the first step in the first model. See attached:
Could this be why you are missing the information?
I have edited your stair model and completed a test. It seems to be fine, see attached and let me know if you are still having problems.
Regards,
Isaac
November 15, 2014
Offline
Hi Isaac
Testfile
reg Torkild
March 25, 2024
Offline
Torkild,
Do you have a StairDesigner file that you can send me as well?
Regards,
Isaac
March 25, 2024
Offline
Thanks Torkild,
I will have a look at these and respond to you soon.
Regards,
Isaac
November 15, 2014
Offline
Hi Isaac
Here you are.
Regards Torkild
1 Guest(s)
