Wood Designer forum
Request for Stairfile|Forum|WOOD DESIGNER
October 17, 2024
Offline
Alex. I’m sorry. I didn’t realized that all the templates were included in the attachment
Thank you
October 17, 2024
Offline
Thanks Alex, I appreciate.
What about the 1:1 templates for the stringers. This is what I was expected to get when I choose the 1;1 template option. I really need those want at this stage, as I will cut the stringers by hand
Regards, Rosaire
Moderator
January 20, 2017
Offline
Hi,
Ok, I have prepare docs at 35 5/8 if they respect scale that’s should be OK
but ask to print 1 step first to control,
All the best, Alex
October 17, 2024
Offline
Thanks Alex.
I remember the printing shop saying that there is about a 1/8″ on either side that cannot print. Something to do with the guiding or something of the paper
Moderator
January 20, 2017
Offline
Hi,
Sorry please find your files attached,
I have also included samples of your stair 1:1 templates, with steps at 36″ (914mm)
Sometimes you don’t have no margins option from printer and need for exemple to printer at 35″ ⁵/₈ (905mm)
All the best, Alex
October 17, 2024
Offline
Hey Alex, there are no attachment to your post
October 17, 2024
Offline
Thanks Alex. The printer is 36″. what does it mean “the templates have no margins”, so I can inform the printer shop
1 Guest(s)
