Wood Designer forum
Stair file|Forum|WOOD DESIGNER
August 7, 2014
Hi Fabian
Here are your documents
regards
Michel
August 7, 2014
Hi Fabian
see new version
regards
Michel
August 7, 2014
Hi Fabian
See the corrected version and advise if this is ok for you
I guess you need a handrail too ?
regards
Michel
August 7, 2014
Hi Fabian,
I can send you the manufacturing files but there are some issues on the stair you need to look at.
Penetration of 30mm is too important. I would reduce to 15mm
Steps are not penetrating the newels.
Risers are not penetrating the steps on the nose side and are not continuing behind the back of the step.
No landing step.
Stringer length before the first step should be set around 20mm.
Stringers are penetrating the newels in full size. Have you ever worked with tenons?
Let me know if you need some of these changes or just the documents.
Regards
Michel
November 8, 2013
Hi Fabian, thanks for signing up and for posting on the forum
However, your file didn’t upload, can you try again please.
Here’s a video to help you if required: https://vimeopro.com/wooddesig…..rum-basics
For information, we will upload your manufacturing documents to the forum here.
1 Guest(s)