Wood Designer forum
Stair project - plans in dxf pls|Forum|WOOD DESIGNER
Home
michel melon said
Hi Zeljkohere are the files
regards
Michel
Tvm Michael,
I will pass those files to carpentry shop now, and possibly if they will need additinal demands I’ll come to you later. It looks very nice to me.
Brgds,
Zeljko
August 7, 2014
Offline
Hi Zeljko
here are the files
regards
Michel
michel melon said
Hi Zeljkodo you need the DXF processing files ?
regards
Michel
yes pls
August 7, 2014
Offline
Hi Zeljko
do you need the DXF processing files ?
regards
Michel
Everithing is fine than. Top newel post is ok. Since i’ll put 20mm steel connecting wooden beam and last newel post. Dont worry about that. With balustrades i gonna do it by myself after the stairs will be up and running.
August 7, 2014
Offline
Hi Zeljko
Your stair probably fits but the drawing is very small so I can almost not read it. I would like to know what your problem is with the balustrade. I guess you mean a balustrade on the first level. This can be done in SD7 with some workaround. For that I need a clear view on your drawing . Can you send one with a higher definition as this is only a 40kb file.
Your top newel should be connected to the stringer to create a strong connection. Just put on top weakens the strenght of the newel as there is not a strong fixing point.
regards
Michel
i did a sketch since i dont quite understand where is your concern. If this sketch is not good then ill do it in sketchup, but didnt work for quite some time in it.so it will ttake me a day or 2.
If i understand your sd7 those stairs i send you should be doable as i draw it.
August 7, 2014
Offline
Hi Zeljko
Sorry for the delay. I see some issues on the stair. There is no need to remove the last step as per default sd7 does not apply a landing step unless you specify it.
Send me a drawing of what you need to achieve. I will look at it and revert asap
regards
Michel
I have found a way how to remove last landing step. And i add final banister. I tried to add balustrade but didn’t succed (stringboard is changing the parameters of the stairs), so i gave up.
Pls can someone reply to this mail so that i know that you received it and you gonna send me a dxf plans.
Brgds,
Zeljko
1 Guest(s)
