Wood Designer forum
Stair with winder turn not 90 degrees|Forum|WOOD DESIGNER
Home
Full
March 1, 2015
Offline
Interesting !
Free
May 21, 2018
Offline
Hi Michel,
Thank you very much for the video.
It explains everything perfectly.
Mike
Moderator
August 7, 2014
Online
Hi Michael,
I made a video to explain how it is done
https://screencast-o-matic.com…..cqnjqk3JLh
regards
Michel
Free
May 21, 2018
Offline
Hi Michel,
The wall sizes 1050,2280 are definately correct, as is the width points, the angled back is based on a line drawing I did with a scale rule, so if we go with the sizes you have there, I am happy with that.
If you can let me know how it is done that would be great.
Thanks
Moderator
August 7, 2014
Online
Hi Michael ,
There is something with the measurements . See my plan and the red measures . this can perfectly be done in SD7 but we need to be sure on the measurements
regards
Michel
Free
May 21, 2018
Offline
Hi Michel,
Hope that upload is succesful.
Thanks
MIKE
Moderator
August 7, 2014
Online
Hi Michael,
Glad you found a solution to it on the site.
Can you post your stair so that I can look into your problem?
regards
Michel
Free
May 21, 2018
Offline
Hi Stefan,
Ive found something on your site that helped, but what I cant find is how you vary the widthe of a stair from top to bottom. I have a stair with right hand rotation and the right hand stringer and turn are 90 degrees, and into a newel post, but the left hand stringers which are against walls are obtuse.
Can this be done in stair designer?
Thanks
1 Guest(s)
