Wood Designer forum
Angled unit|Forum|WOOD DESIGNER
Home
May 12, 2020
Offline
Thank you Alex helpful as always 
Caroline
January 20, 2017
Offline
Hi,
For this type of cabinet, a double back will not work.
But it is possible to add regular drilling with more addaper rules
Cheers, Alex
May 12, 2020
Offline
Hi Alex
Just one thing we are adding an adjustable shelf to this unit so i need to apply regular drillings to left back, right back, left side and right side. I add a double back no hardware as i would normally to do the back drillings it doesn’t seem to work could you send video please
Thanks Caroline
May 12, 2020
Offline
Thank you Alex that video and info was great
Caroline
January 20, 2017
Offline
Hi,
There is a slight subtlety to what you want to achieve
In FreeShap mode or angled cabinet the dimension is the overall cabinet
This means that 300 mm at 45° in 18mm exterior will give 318mm.
From what I understand, you need 300 mm but start from 282mm (282 + 18mm of 45° that we will add later).
Hope this video helpful
Cheers, Alex
May 12, 2020
Offline
Hi
Please see attached sketch and angled unit i have started on polyboard, as you can see on sketch need the distance from front to back to be 850mm with the 50mm overhang from side gables
I have started it in polyboard but i cant get the 850mm at the back can you help? Also gables should be 300mm but are 318mm? Please send video of how this can be done
Thanks Caroline
1 Guest(s)
