Wood Designer forum
post processor not working with bsolid 2020|Forum|WOOD DESIGNER
Moderator
November 8, 2013
Offline
Just to update this thread, we’re discussing this additional feature with the developer team as you know. And our team has advised you on a short term solution using the DXF post processor. Thanks
The instructions changing the CIX postprocessor:
Drilling with the drill unit:
PARAM,NAME=TTP,VALUE=0
For drilling with the 5 axe the parameter has to be changed in:
PARAM,NAME=TTP,VALUE=100
make it optional in the ini settings
Thats all…
Please reply on my other questions:
I quote ” How can i in the meantime work will polyboard?
I tried shape but shape only works with vertical. By horizontal shape the cix is emty.”
Hi,
Do you have alle the information to update?
I hope they will make it soon!
How can i in the meantime work will polyboard?
I tried shape but shape only works with vertical. By horizontal shape the cix is emty.
Moderator
January 20, 2017
Offline
Hi,
Maybe it is not yet available for this PP,
If you can upload files with all the examples of the exact instructions we can discuss with the development team who will judge the interest, the difficulties and the number of requests for the addition of this new option later, if possible.
Cheers, Alexandre
Alex said
Hi,I’m not sure but can you try to change PP Max drilling Diameter
All drilling greater than this parameter PP use milling instead,
Hope that’s helpful
Alexandre
Hi,
I found that max drilling diameter in pp only works with horizontal drilling. Not with vertical.
Any idea why?
examples bsolid:
Foto 1 Type gereedschap “normal” but thats for drilling wit drill unit
Foto 2 Type gereedschap “kaars” thats for 5 axes drilling
Can you make the parameter TTP optional for user with 5 axes?
Moderator
January 20, 2017
Offline
Using shape instead of drilling?
These are only options tried, as the specific modification will impact the many users who already use this PP.
Cheers, Alexandre
Hi,
I changed the max dia in the post. But there was no change in the cix.
Are there other options?
Is it possible to change the parameter?
Dennis
Moderator
January 20, 2017
Offline
Hi,
I’m not sure but can you try to change PP Max drilling Diameter
All drilling greater than this parameter PP use milling instead,
Hope that’s helpful
Alexandre
Hi,
We have a Rover A Biesse with Bsolid. The posprocessor from polyboard generates a cix for the drill unit but i want to drill with the 5 axe engine. Can you change the postprocessor?
PARAM,NAME=TTP,VALUE=0
has to be changed in:
PARAM,NAME=TTP,VALUE=100
We use the Biesseworks CIX postprocessor
Best Regards,
Dennis Goedhart
1 Guest(s)
