Wood Designer forum
Cupboard hangers|Forum|WOOD DESIGNER
Home
January 20, 2017
Offline
Hi Patrick,
From fitting link,
– You can play with the situation buttons at the top right to see more easily how the fixing links will work.
(activating or deactivating an icon option does not affect the final link)
– You can now set the reference starting points for the hardware (the red dotted line),
Reference axis , Face 1, Face 2, Centre to the Underpassing panel , or if well understand for your case Overpassing panel edge
Consider the Recesse Value , Yes for Underpassing edge surface, or No, for inside overpassing face
In case where you need 2 references you must create and add 2 fittings link
Hope that’s helpful, Alex
May 3, 2023
Offline
Hi Gents
I would like to be able to create a cupboard hanger to make the cut out in the back and drill the holes ready for the hanger. I have set up one fixing which works when the back is flush but I cannot get the holed to stay in the same place when the back is recessed in using the same model (i.e. the holes are referenced to the back panel and I don’t seem to be able to find a way for them to be referenced to the back edge of the side which is the overpassing panel). As the brackets do not move when the back is recessed or if the material thickness changes the holes need to stay in the same place but the cut out in the back obviously has to remain with the panel.
Do you have a way of doing this?
Thanks
Patrick
1 Guest(s)
