Wood Designer forum
Geometric exception|Forum|WOOD DESIGNER
Full
January 28, 2018
Offline
great, thanks
Moderator
January 20, 2017
Offline
Hi,
All minor updates are included,
Just look first Number , OptiNest 2.32G (Form 2.32D), Or PolyBoard 7.08M (7.07Q)
In case of a major update, Polyboard 8.xx or OptiNest 3.xx, for example 
, I’ll be sure to let you know, but that shouldn’t happen for at least 1/2 years 
And when you update one of them, a little look on the download page will show you the download version
Cheers, Alex
Full
January 28, 2018
Offline
Thanks Alex, I have installed the polyboard.
Is the optinest 2.32G a free upgrade?
Regards, Conor
Moderator
January 20, 2017
Offline
Hi,
For geometric exception bug as been resolved since 7.08
Please update to the last version available 7.08M,
Without uninstalling your current version
Closed, download ( [Permission to view this media is denied]
)and run installpolyboard.exe,
Then follow instructions on your screen
You can do them same for OptiNest 2.32G
[Permission to view this media is denied]
all the best, Alex
Full
January 28, 2018
Offline
Hi Michel,
I am using 7.07q and Optinest 2.32d
I have changed the drawing to thickness split using 19mm oak plus a 6mm slack and a 19mm oak.
Also where there were 10mm deep mortices I’ve changed these to 19mm in case faces were getting confused.
This has allowed me nest the 19mm oak but I will have to cut the 6mm mdf separately.
Unfortunately I did not keep a copy of the file giving me the problems, so I have nothing to send you.
Your previous posts interest me, you feel using two different materials and different thicknesses in one shelf should work.
Thanks for you help.
Conor
Moderator
August 7, 2014
Offline
Hi Connor,
please attach your cabinet file and inform us which pp you are using
regards
Michel
Full
January 28, 2018
Offline
Hi all, I just tried to export to post processor and it won’t work.
I got a warning of geometric exception.
There is huge pressure to get this fitted before the world cup for a client and I need to cut today.
I’ll attach the file, if you could look at it as soon as possible I would really appreciate it.
Regards and thanks,
Conor
1 Guest(s)
