Wood Designer forum
Peanut post processor error|Forum|WOOD DESIGNER
Moderator
August 7, 2014
Offline
Hi Zaheer
if the PB pc and the CNC pc are different, you need to have access to the macro for PB, as it needs to call the macro in the hardware library.
regards
Michel
Full
May 5, 2022
Offline
dear alex
can u explain me more, what u mean by this?
“and don’t forget the macro must install on PolyBoard to call her and the CN computer if differentes”
Moderator
January 20, 2017
Offline
Hi,
We are not in a position to answer this question,
don’t forget the macro must be installed on PolyBoard to call it if the CNC computer is different
You will need to contact your dealer directly to find out whether there are more appropriate versions for your CNC.
Cheers, Alex
Full
May 5, 2022
Offline
Hello,
we have an error with the peanut macro, we are using the peanut fitting from your library on Biessework ver: 3.4.17.1251.
When trying to cut on the CNC Machine a programmer error appears.
How can we solve this?
I have attached the error photo.
1 Guest(s)
