Log In
Home
January 20, 2017
Offline
Hi,
after feasibility study, this customization will not be retained by the development team for the current version,
Cheers, Alex
January 20, 2017
Offline
Hi,
I will forward this file to the development team early next week
Cheers, Alex
November 15, 2014
Offline
Hi Alex
cix file attached
reg T
January 20, 2017
Offline
Hi,
Can you compress before uploading it?
Cheers, Alex
November 15, 2014
Offline
Hi Alex
Don't know why , but we can't upload the cix file (file format error occurs)
January 20, 2017
Offline
Hi,
Can you send me your Post-Processor,
and the edited CIX files, to forward your request to the development team.
Thanks, Alex
November 15, 2014
Offline
Hi Alex
If you open up the cix file and look through the textfile , its relative simple. Its a matter of using the chamfer option on vertical "cut's" instead af the profiling sequense. The parameter name "AZ" just needs to be 0.
thank's Torkild
January 20, 2017
Offline
This is the first time someone has asked to use the saw blade to cut the panels
I can ask the development team if this is possible in a future exchange, to study the feasibility
But this is part of the customisation with participation subject to quotation
Let me know if you are interested?
Cheers, Alex
November 15, 2014
Offline
biesse CIX
January 20, 2017
Offline
Hi,
Which post-processor do you use?
Cheers, Alex
November 15, 2014
Offline
Can we use the sawblade instead of routing rutine to do the profiling. The postp. only uses the sawblade for tiltet panels. It would good to be able to force the postp. to specific opetations.
1 Guest(s)
Usage Policy