Wood Designer forum
Shaker doors|Forum|WOOD DESIGNER
Home
January 20, 2017
Offline
Hi,
There is currently no parametric solution with inner tooling.
Cheers, Alex
April 10, 2016
Offline
HI Alex
Thanks for the reply, is it possible to do this method which is parametric , the same way a structured panel assembly 
January 20, 2017
Offline
Hi,
This video is an example of full processing,
But you can apply the internal tool to draw shapes,
Then, in Vcarve, select the shapes and apply the pockets.
Be careful, if the depth is too pronounced, remember to carry out the same machining on the reverse side, otherwise this will unbalance the forces on the face and when painting it will have a banana effect.
I’ve already been fooled by standard MDF, so I recommend high-density MDF.
Cheers, Alex
April 10, 2016
Offline
Hi Alex
Thanks for the video , i have give this a try but when i ouput to vcarve it creates multiple dxf files for each component and not one single panel.
is this possible to create a single panel output of a shaker door with mid rails like the photo attached??
Hope this makes sense
Many Thanks
Dean
January 20, 2017
Offline
Hi,
This video should helpful,
All the best, Alex
April 10, 2016
Offline
Hi ,
I have made the shaker doors on this cabinet using inner tooling but would like to be able add rails and make it a library structure if that is possible please.
i am wanting this method so i can output it as a single panel to cnc out the inner tooling section and create a shaker look alike.
Hope this is possible
Many Thanks
Dean
1 Guest(s)
