add riser to end of staircase|Forum|WOOD DESIGNER

Home Forum StairDesigner add riser to end of staircase

add riser to end of staircase

Michel

Forum Posts: 1029

Subscriber Since:
August 7, 2014

Offline

May 7, 2024 - 6:49 am

Hi Johaan,

Here is another video that might be more useful for you

regards

Michel

1-2-1 Support & Training | Help Centre | How to use the Forum

Yohaan Chandra

Forum Posts: 19

Subscriber Since:
February 27, 2024

Offline

May 1, 2024 - 10:29 am

Hi alex, how can i add that riser to my stringboard like i referred to on my screenshot in my initial message? as i want to now add that final riser to be flush with the existing floor as it gives a good finished look aswell. please advise. note, there was no sound in the previous video you have sent.

Thanks

Alex said
Hi,

Please see video below,

We have received your e-mail and we would like to warn you that the Headroom check is carried out from the last step, not the landing step.

with 2100mm of value, this would mean that with an average step height of 210mm, the ceiling would be 1890mm on the landing step.

Cheers, Alex

Alex

Forum Posts: 1920

Subscriber Since:
January 20, 2017

Offline

April 22, 2024 - 11:51 am

Hi,

Please see video below,

We have received your e-mail and we would like to warn you that the Headroom check is carried out from the last step, not the landing step.

with 2100mm of value, this would mean that with an average step height of 210mm, the ceiling would be 1890mm on the landing step.

Cheers, Alex

1-2-1 Support & Training | Help Centre | How to use the Forum

Yohaan Chandra

Forum Posts: 19

Subscriber Since:
February 27, 2024

Offline

April 21, 2024 - 12:03 am

is it possible to add a riser after the last tread in a staircase? so instead of our finished tread touching the existing floor, theres a riser to flush with the existing floor?

i have added an example

red= existing floor

green= the riser i want to add into the stringer so it flushes with the existing floor