Alex said
Ho sorry!

It is only for better understanding with standard setup, for full compatible file you need to do your own PP setting 😉

If you look at the cross-section of the stringer in 3D (left click then select “Selection 3D view”) , the first line corresponds to the inside chamfer and the second to the outside chamfer.

 

Cheers, Alex

  

Mornings

Of course, thank you very much,

It’s a nice program you’ve made.

hey Alex

Thanks for sent 😉

On several of the 2d drawings there are some double lines that I cannot locate where they come from! attached example.

You have attached some Hop files which I believe are for a holzer cnc router, the one I have is a homag and uses Woodwop with mrp files.

Alex said
Hi,

After a quick look, your strings are not wide enough.

We recommande 150mm, after but if it is ok for you I’ll can send documents

Regards, Alex

  

hey Alex

Thanks for the Feedback, I was thinking of expanding it on my homag cnc, but of course it's easier to do it here.
New file attached.