Wood Designer forum
Post Processor to Biesse |Page 2|Forum|WOOD DESIGNER

August 7, 2014

Hi Stu,
Monday 8 Am your time. I will send you an invitation
regards
Michel

August 7, 2014

Hi Stu,
Can we have a short zoom meeting on this so that I can see the issue on your PC? Tell me what timeframe you can be available and I will send you an invitation via email
regards
Michel


December 7, 2018

Hi Michel
We have checked the PP option and it is already set for excluding special characters so this doesn’t fix our issue.
With Cut List Option not sure what parameters might affect this issue.
It seems to me the once adding multiple similar panels the name is created in the cabinet Edit level which I would presume be altered in ‘Tools-Preference’ level so wondering if this is something that could be done in the ‘Part References’ ?
if it helps I have attached a cabinet from our library
regards
Dave

August 7, 2014

Hi Stu,
also in the cutting list menu ” cutting list options” you can use the parameter grouped cutting list in order to avoid this multitude of separated similar parts.
regards
Michel


December 7, 2018

We are just about all setup but an issue we have to run jobs through with CIX files we cant have any spaces in material names or part names in the cabinets.
I have changed all Material names to suit and gone into Tools-Preferences-Cutomize Panel Type and underscored any gaps in Panel Type descriptions but unfortunately when we get multiples of the same panel type e.g. Mobile Shelves we get a space then bracketed numbers.
example:
Mobile_Shelf [1] when we need no space or filled space ie Mobile_Shelf[1] or Mobile_Shelf_[1]
is there any way of customizing parts to enable filled spaces or do we have to manually do this each time?
regards
Dave

January 20, 2017

Hi,
Did you use the latest version 7.08C?
If not, update and then export again, if your problem is not solved, can you upload your Post-Pro and your cabinet?
For PP, you need to compress it before uploading, right click and send it to…
-Can you please send through what settings need to be to make this work and what settings are required for doing two vertical passes. First pass will leave 1mm of material to remove on second pass.
> From Post-Pro you have option Residual Thickness
After setting this value, you can set the tool for the first pass (other passes) (here I have set tool 102).
And set the tool for the last pass (here tool 101).
the same tool can be used
All the best, Alex
1 Guest(s)
